For a 3,000 sq ft custom new home in the Baltimore area, full architectural services typically run $53,000 – $148,000 — about 7%–18% of construction cost. These ranges come from the Architects List cost tool, built on Baltimore-Columbia-Towson, MD wage data from the US Bureau of Labor Statistics and construction costs from the US Census.
Figures are for the Baltimore-Columbia-Towson, MD metro area, which also takes in Columbia and Towson.
| Project | Architect fee | Share of construction | Construction (est.) |
|---|---|---|---|
| New custom home, 3,000 SF | $53,000 – $148,000 | 7%–18% | $668,000 – $1,100,000 |
| Whole-house renovation, 2,000 SF | $40,000 – $124,000 | 10%–29% | $267,000 – $733,000 |
| Addition, 600 SF | $20,000 – $48,000 | 11%–27% | $126,000 – $275,000 |
| ADU or guest house, 700 SF | $16,000 – $47,000 | 8%–24% | $140,000 – $308,000 |
| Home size | Architect fee | Design hours (approx.) |
|---|---|---|
| 2,000 sq ft | $44,000 – $105,000 | 250–590 |
| 3,000 sq ft | $53,000 – $148,000 | 300–830 |
| 4,500 sq ft | $76,000 – $208,000 | 430–1170 |
Implied billing rate about $177/hour. Full services = design through construction administration; consultants (structural, survey, civil, energy) are extra.
| Home size | Architect fee per sq ft | Share of construction |
|---|---|---|
| 2,000 sq ft | $22 – $53 | 8%–19% |
| 3,000 sq ft | $17 – $50 | 7%–18% |
| 4,500 sq ft | $16 – $47 | 6%–17% |
New custom homes, full services. Building a custom home in the Baltimore area is estimated at $220 – $370 per sq ft, excluding land. That is a figure for this part of the country (US Census), adjusted for local construction wages. A custom home costs more to build than the typical new house, so it sits above the regional median shown below.
| Professional | Typical cost |
|---|---|
| Structural engineerSizes beams, foundations and lateral systems; required for new homes, additions and most structural changes. | $4,000 – $18,000 |
| Civil engineerGrading, drainage, utilities and site permits — common on sloped, rural or floodplain sites. | $3,000 – $12,000 |
| SurveyorBoundary and topographic survey the design is drawn on; most jurisdictions require one for new work near setbacks. | $1,100 – $5,500 |
| Energy consultantEnergy-code compliance calculations (e.g. REScheck, Title 24) and HERS ratings where required. | $500 – $3,500 |
| Geotechnical / soilsSoil borings and a foundation report; needed on slopes, expansive soils and many new homes. | $1,400 – $6,000 |
Planning allowances for a 3,000 sq ft new home, scaled to local wages for each profession (BLS). They are billed separately from the architect’s fee, and not every project needs all of them.
| Place | Architect fee, 3,000 sq ft custom home | Per sq ft | Median architect salary |
|---|---|---|---|
| Baltimore area | $53,000 – $148,000 | $17 – $50 | $115,960 |
| Maryland | $53,000 – $148,000 | $17 – $50 | $114,550 |
| United States | $54,000 – $153,000 | $18 – $51 | $99,280 |
For a 3,000 sq ft custom new home in the Baltimore area, full architectural services typically run $53,000 – $148,000, about 7%–18% of construction cost. A 2,000 sq ft whole-house renovation typically runs $40,000 – $124,000. An ADU or guest house of about 700 sq ft runs $16,000 – $47,000.
For a 3,000 sq ft custom new home in the Baltimore area, full architectural services work out to about $17 – $50 per sq ft, on an estimated construction cost of $220 – $370 per sq ft. Smaller homes cost more per sq ft to design; larger ones cost less.
Most residential architects charge a percentage of construction cost, a fixed fee broken into design phases, or hourly rates for smaller or early-stage work. Smaller projects pay a higher share of construction cost because design effort does not shrink in proportion to size.
The median architect salary in the Baltimore-Columbia-Towson, MD area is $115,960, 17% above the national median of $99,280 (BLS). Local construction costs matter as much: new single-family homes in this part of the country run a median of about $169 per sq ft (US Census).
Consultants such as structural engineers, surveyors, civil engineers and energy modelers usually bill separately, as do permit and plan-review fees charged by the building department. In the Baltimore area, a structural engineer for a 3,000 sq ft new home typically runs $4,000 – $18,000. Ask each architect which consultants their fee includes.
Architect fees nearby
Architect fees in Maryland → · Architect fees by state → · Browse architects in the Mid-Atlantic →
Looking for an architect in Baltimore?
Tell us about your project and we'll connect you with the right architect — free, no obligation.
Sources: US Bureau of Labor Statistics, Occupational Employment and Wage Statistics (May 2025) for Baltimore-Columbia-Towson, MD; US Census Bureau, Survey of Construction. Estimates are ranges for planning, not quotes — each architect sets their own fees.