For a 3,000 sq ft custom new home in the Raleigh area, full architectural services typically run $49,000 – $136,000 — about 6%–18% of construction cost. These ranges come from the Architects List cost tool, built on Raleigh-Cary, NC wage data from the US Bureau of Labor Statistics and construction costs from the US Census.
Figures are for the Raleigh-Cary, NC metro area, which also takes in Cary.
| Project | Architect fee | Share of construction | Construction (est.) |
|---|---|---|---|
| New custom home, 3,000 SF | $49,000 – $136,000 | 6%–18% | $648,000 – $1,047,000 |
| Whole-house renovation, 2,000 SF | $38,000 – $114,000 | 9%–27% | $259,000 – $698,000 |
| Addition, 600 SF | $17,500 – $45,000 | 11%–26% | $123,000 – $262,000 |
| ADU or guest house, 700 SF | $15,000 – $44,000 | 8%–23% | $136,000 – $293,000 |
| Home size | Architect fee | Design hours (approx.) |
|---|---|---|
| 2,000 sq ft | $39,000 – $97,000 | 250–610 |
| 3,000 sq ft | $49,000 – $136,000 | 320–860 |
| 4,500 sq ft | $70,000 – $192,000 | 450–1220 |
Implied billing rate about $157/hour. Full services = design through construction administration; consultants (structural, survey, civil, energy) are extra.
| Home size | Architect fee per sq ft | Share of construction |
|---|---|---|
| 2,000 sq ft | $19 – $49 | 8%–19% |
| 3,000 sq ft | $16 – $46 | 6%–18% |
| 4,500 sq ft | $15 – $43 | 6%–16% |
New custom homes, full services. Building a custom home in the Raleigh area is estimated at $215 – $350 per sq ft, excluding land. That is a figure for this part of the country (US Census), adjusted for local construction wages. A custom home costs more to build than the typical new house, so it sits above the regional median shown below.
| Professional | Typical cost |
|---|---|
| Structural engineerSizes beams, foundations and lateral systems; required for new homes, additions and most structural changes. | $3,500 – $17,000 |
| Civil engineerGrading, drainage, utilities and site permits — common on sloped, rural or floodplain sites. | $3,000 – $12,000 |
| SurveyorBoundary and topographic survey the design is drawn on; most jurisdictions require one for new work near setbacks. | $1,300 – $6,500 |
| Energy consultantEnergy-code compliance calculations (e.g. REScheck, Title 24) and HERS ratings where required. | $400 – $3,000 |
| Geotechnical / soilsSoil borings and a foundation report; needed on slopes, expansive soils and many new homes. | $1,400 – $6,000 |
Planning allowances for a 3,000 sq ft new home, scaled to local wages for each profession (BLS). They are billed separately from the architect’s fee, and not every project needs all of them.
| Place | Architect fee, 3,000 sq ft custom home | Per sq ft | Median architect salary |
|---|---|---|---|
| Raleigh area | $49,000 – $136,000 | $16 – $46 | $91,570 |
| North Carolina | $49,000 – $135,000 | $16 – $45 | $95,700 |
| United States | $54,000 – $153,000 | $18 – $51 | $99,280 |
For a 3,000 sq ft custom new home in the Raleigh area, full architectural services typically run $49,000 – $136,000, about 6%–18% of construction cost. A 2,000 sq ft whole-house renovation typically runs $38,000 – $114,000. An ADU or guest house of about 700 sq ft runs $15,000 – $44,000.
For a 3,000 sq ft custom new home in the Raleigh area, full architectural services work out to about $16 – $46 per sq ft, on an estimated construction cost of $215 – $350 per sq ft. Smaller homes cost more per sq ft to design; larger ones cost less.
Most residential architects charge a percentage of construction cost, a fixed fee broken into design phases, or hourly rates for smaller or early-stage work. Smaller projects pay a higher share of construction cost because design effort does not shrink in proportion to size.
The median architect salary in the Raleigh-Cary, NC area is $91,570, 8% below the national median of $99,280 (BLS). Local construction costs matter as much: new single-family homes in this part of the country run a median of about $169 per sq ft (US Census).
Consultants such as structural engineers, surveyors, civil engineers and energy modelers usually bill separately, as do permit and plan-review fees charged by the building department. In the Raleigh area, a structural engineer for a 3,000 sq ft new home typically runs $3,500 – $17,000. Ask each architect which consultants their fee includes.
Architect fees nearby
Architect fees in North Carolina → · Architect fees by state → · Browse architects in the Southeast →
Looking for an architect in Raleigh?
Tell us about your project and we'll connect you with the right architect — free, no obligation.
Sources: US Bureau of Labor Statistics, Occupational Employment and Wage Statistics (May 2025) for Raleigh-Cary, NC; US Census Bureau, Survey of Construction. Estimates are ranges for planning, not quotes — each architect sets their own fees.