For a 3,000 sq ft custom new home in Connecticut, full architectural services typically run $65,000 – $182,000 — about 5%–13% of construction cost. These ranges come from the Architects List cost tool, built on Connecticut wage data from the US Bureau of Labor Statistics and construction costs from the US Census.
| Project | Architect fee | Share of construction | Construction (est.) |
|---|---|---|---|
| New custom home, 3,000 SF | $65,000 – $182,000 | 5%–13% | $1,077,000 – $1,917,000 |
| Whole-house renovation, 2,000 SF | $50,000 – $150,000 | 7%–20% | $431,000 – $1,278,000 |
| Addition, 600 SF | $20,000 – $59,000 | 6%–19% | $204,000 – $480,000 |
| ADU or guest house, 700 SF | $19,500 – $58,000 | 6%–16% | $226,000 – $537,000 |
| Home size | Architect fee | Design hours (approx.) |
|---|---|---|
| 2,000 sq ft | $46,000 – $128,000 | 290–810 |
| 3,000 sq ft | $65,000 – $182,000 | 410–1150 |
| 4,500 sq ft | $91,000 – $258,000 | 580–1630 |
Implied billing rate about $158/hour. Full services = design through construction administration; consultants (structural, survey, civil, energy) are extra.
| Home size | Architect fee per sq ft | Share of construction |
|---|---|---|
| 2,000 sq ft | $23 – $64 | 5%–14% |
| 3,000 sq ft | $21 – $61 | 5%–13% |
| 4,500 sq ft | $20 – $58 | 4%–12% |
New custom homes, full services. Building a custom home in Connecticut is estimated at $355 – $640 per sq ft, excluding land. That is a figure for this part of the country (US Census), adjusted for local construction wages. A custom home costs more to build than the typical new house, so it sits above the regional median shown below.
| Professional | Typical cost |
|---|---|
| Structural engineerSizes beams, foundations and lateral systems; required for new homes, additions and most structural changes. | $6,000 – $31,000 |
| Civil engineerGrading, drainage, utilities and site permits — common on sloped, rural or floodplain sites. | $3,500 – $12,500 |
| SurveyorBoundary and topographic survey the design is drawn on; most jurisdictions require one for new work near setbacks. | $1,200 – $6,000 |
| Energy consultantEnergy-code compliance calculations (e.g. REScheck, Title 24) and HERS ratings where required. | $400 – $3,000 |
| Geotechnical / soilsSoil borings and a foundation report; needed on slopes, expansive soils and many new homes. | $1,500 – $6,500 |
Planning allowances for a 3,000 sq ft new home, scaled to local wages for each profession (BLS). They are billed separately from the architect’s fee, and not every project needs all of them.
| Metro area | Architect fee, 3,000 sq ft custom home | Median architect salary |
|---|---|---|
| Bridgeport | $68,000 – $188,000 | $105,140 |
| Hartford | $63,000 – $178,000 | $102,080 |
| New Haven | $63,000 – $178,000 | $102,880 |
| Norwich | $63,000 – $177,000 | $106,090 |
| Waterbury | $62,000 – $173,000 | $102,550 |
Metro areas where the Bureau of Labor Statistics publishes a local architect wage, largest first. Elsewhere in Connecticut, the statewide figures above apply.
| Place | Architect fee, 3,000 sq ft custom home | Per sq ft | Median architect salary |
|---|---|---|---|
| Connecticut | $65,000 – $182,000 | $21 – $61 | $103,540 |
| United States | $54,000 – $153,000 | $18 – $51 | $99,280 |
For a 3,000 sq ft custom new home in Connecticut, full architectural services typically run $65,000 – $182,000, about 5%–13% of construction cost. A 2,000 sq ft whole-house renovation typically runs $50,000 – $150,000. An ADU or guest house of about 700 sq ft runs $19,500 – $58,000.
For a 3,000 sq ft custom new home in Connecticut, full architectural services work out to about $21 – $61 per sq ft, on an estimated construction cost of $355 – $640 per sq ft. Smaller homes cost more per sq ft to design; larger ones cost less.
Most residential architects charge a percentage of construction cost, a fixed fee broken into design phases, or hourly rates for smaller or early-stage work. Smaller projects pay a higher share of construction cost because design effort does not shrink in proportion to size.
The median architect salary in Connecticut is $103,540, 4% above the national median of $99,280 (BLS). Local construction costs matter as much: new single-family homes in this part of the country run a median of about $259 per sq ft (US Census).
Consultants such as structural engineers, surveyors, civil engineers and energy modelers usually bill separately, as do permit and plan-review fees charged by the building department. In Connecticut, a structural engineer for a 3,000 sq ft new home typically runs $6,000 – $31,000. Ask each architect which consultants their fee includes.
Looking for an architect in Connecticut?
Tell us about your project and we'll connect you with the right architect — free, no obligation.
Sources: US Bureau of Labor Statistics, Occupational Employment and Wage Statistics (May 2025) for Connecticut; US Census Bureau, Survey of Construction. Estimates are ranges for planning, not quotes — each architect sets their own fees.