For a 3,000 sq ft custom new home in Kentucky, full architectural services typically run $47,000 – $130,000 — about 6%–16% of construction cost. These ranges come from the Architects List cost tool, built on Kentucky wage data from the US Bureau of Labor Statistics and construction costs from the US Census.
| Project | Architect fee | Share of construction | Construction (est.) |
|---|---|---|---|
| New custom home, 3,000 SF | $47,000 – $130,000 | 6%–16% | $649,000 – $1,087,000 |
| Whole-house renovation, 2,000 SF | $36,000 – $108,000 | 8%–25% | $259,000 – $725,000 |
| Addition, 600 SF | $15,500 – $42,000 | 9%–24% | $123,000 – $272,000 |
| ADU or guest house, 700 SF | $14,000 – $41,000 | 7%–21% | $136,000 – $305,000 |
| Home size | Architect fee | Design hours (approx.) |
|---|---|---|
| 2,000 sq ft | $34,000 – $92,000 | 250–660 |
| 3,000 sq ft | $47,000 – $130,000 | 340–940 |
| 4,500 sq ft | $66,000 – $183,000 | 490–1330 |
Implied billing rate about $138/hour. Full services = design through construction administration; consultants (structural, survey, civil, energy) are extra.
| Home size | Architect fee per sq ft | Share of construction |
|---|---|---|
| 2,000 sq ft | $17 – $46 | 7%–17% |
| 3,000 sq ft | $15 – $44 | 6%–16% |
| 4,500 sq ft | $14 – $41 | 6%–15% |
New custom homes, full services. Building a custom home in Kentucky is estimated at $215 – $365 per sq ft, excluding land. That is a figure for this part of the country (US Census), adjusted for local construction wages. A custom home costs more to build than the typical new house, so it sits above the regional median shown below.
| Professional | Typical cost |
|---|---|
| Structural engineerSizes beams, foundations and lateral systems; required for new homes, additions and most structural changes. | $3,500 – $17,500 |
| Civil engineerGrading, drainage, utilities and site permits — common on sloped, rural or floodplain sites. | $3,000 – $12,000 |
| SurveyorBoundary and topographic survey the design is drawn on; most jurisdictions require one for new work near setbacks. | $1,000 – $5,000 |
| Energy consultantEnergy-code compliance calculations (e.g. REScheck, Title 24) and HERS ratings where required. | $400 – $3,000 |
| Geotechnical / soilsSoil borings and a foundation report; needed on slopes, expansive soils and many new homes. | $1,400 – $6,000 |
Planning allowances for a 3,000 sq ft new home, scaled to local wages for each profession (BLS). They are billed separately from the architect’s fee, and not every project needs all of them.
| Metro area | Architect fee, 3,000 sq ft custom home | Median architect salary |
|---|---|---|
| Cincinnati, OH | $54,000 – $148,000 | $98,750 |
| Lexington | $47,000 – $128,000 | $93,640 |
| Louisville | $48,000 – $133,000 | $100,760 |
| Clarksville, TN | $47,000 – $130,000 | $93,900 |
Metro areas where the Bureau of Labor Statistics publishes a local architect wage, largest first. Elsewhere in Kentucky, the statewide figures above apply.
| Place | Architect fee, 3,000 sq ft custom home | Per sq ft | Median architect salary |
|---|---|---|---|
| Kentucky | $47,000 – $130,000 | $15 – $44 | $97,680 |
| United States | $54,000 – $153,000 | $18 – $51 | $99,280 |
For a 3,000 sq ft custom new home in Kentucky, full architectural services typically run $47,000 – $130,000, about 6%–16% of construction cost. A 2,000 sq ft whole-house renovation typically runs $36,000 – $108,000. An ADU or guest house of about 700 sq ft runs $14,000 – $41,000.
For a 3,000 sq ft custom new home in Kentucky, full architectural services work out to about $15 – $44 per sq ft, on an estimated construction cost of $215 – $365 per sq ft. Smaller homes cost more per sq ft to design; larger ones cost less.
Most residential architects charge a percentage of construction cost, a fixed fee broken into design phases, or hourly rates for smaller or early-stage work. Smaller projects pay a higher share of construction cost because design effort does not shrink in proportion to size.
The median architect salary in Kentucky is $97,680, 2% below the national median of $99,280 (BLS). Local construction costs matter as much: new single-family homes in this part of the country run a median of about $162 per sq ft (US Census).
Consultants such as structural engineers, surveyors, civil engineers and energy modelers usually bill separately, as do permit and plan-review fees charged by the building department. In Kentucky, a structural engineer for a 3,000 sq ft new home typically runs $3,500 – $17,500. Ask each architect which consultants their fee includes.
Looking for an architect in Kentucky?
Tell us about your project and we'll connect you with the right architect — free, no obligation.
Sources: US Bureau of Labor Statistics, Occupational Employment and Wage Statistics (May 2025) for Kentucky; US Census Bureau, Survey of Construction. Estimates are ranges for planning, not quotes — each architect sets their own fees.