How much does an architect cost in New York?

For a 3,000 sq ft custom new home in New York, full architectural services typically run $67,000 – $193,000 — about 5%–13% of construction cost. These ranges come from the Architects List cost tool, built on New York wage data from the US Bureau of Labor Statistics and construction costs from the US Census.

Typical fees by project in New York

ProjectArchitect feeShare of constructionConstruction (est.)
New custom home, 3,000 SF$67,000 – $193,0005%–13%$909,000 – $2,008,000
Whole-house renovation, 2,000 SF$51,000 – $161,0006%–20%$363,000 – $1,339,000
Addition, 600 SF$20,000 – $63,0006%–19%$172,000 – $502,000
ADU or guest house, 700 SF$20,000 – $61,0006%–17%$191,000 – $563,000

New custom home fees by size

Home sizeArchitect feeDesign hours (approx.)
2,000 sq ft$47,000 – $136,000290–820
3,000 sq ft$67,000 – $193,000400–1160
4,500 sq ft$94,000 – $274,000570–1640

Implied billing rate about $166/hour. Full services = design through construction administration; consultants (structural, survey, civil, energy) are extra.

Architect fees per square foot in New York

Home sizeArchitect fee per sq ftShare of construction
2,000 sq ft$23 – $685%–14%
3,000 sq ft$22 – $655%–13%
4,500 sq ft$21 – $614%–12%

New custom homes, full services. Building a custom home in New York is estimated at $300 – $670 per sq ft, excluding land. That is a figure for this part of the country (US Census), adjusted for local construction wages. A custom home costs more to build than the typical new house, so it sits above the regional median shown below.

Other professionals you may need in New York

ProfessionalTypical cost
Structural engineerSizes beams, foundations and lateral systems; required for new homes, additions and most structural changes.$5,000 – $33,000
Civil engineerGrading, drainage, utilities and site permits — common on sloped, rural or floodplain sites.$3,500 – $13,500
SurveyorBoundary and topographic survey the design is drawn on; most jurisdictions require one for new work near setbacks.$1,300 – $6,000
Energy consultantEnergy-code compliance calculations (e.g. REScheck, Title 24) and HERS ratings where required.$400 – $3,000
Geotechnical / soilsSoil borings and a foundation report; needed on slopes, expansive soils and many new homes.$1,600 – $7,000

Planning allowances for a 3,000 sq ft new home, scaled to local wages for each profession (BLS). They are billed separately from the architect’s fee, and not every project needs all of them.

Architect fees by metro area in New York

Metro areaArchitect fee, 3,000 sq ft custom homeMedian architect salary
New York$68,000 – $197,000$99,710
Albany$64,000 – $185,000$98,350
Buffalo$63,000 – $182,000$95,130
Rochester$63,000 – $180,000$95,480
Syracuse$61,000 – $178,000$94,170
Poughkeepsie$68,000 – $193,000$94,990
Ithaca$64,000 – $184,000$96,920
Binghamton$66,000 – $189,000$105,600
Glens Falls$66,000 – $188,000$111,200
Watertown$64,000 – $183,000$102,490

Metro areas where the Bureau of Labor Statistics publishes a local architect wage, largest first. Elsewhere in New York, the statewide figures above apply.

How New York compares

PlaceArchitect fee, 3,000 sq ft custom homePer sq ftMedian architect salary
New York$67,000 – $193,000$22 – $65$99,280
United States$54,000 – $153,000$18 – $51$99,280

What drives architect fees in New York

Architect salaries
Median $99,280 in New York vs $99,280 nationally (BLS, May 2025)
Construction cost
New single-family homes in this region: median $208/sq ft; middle half $159–$300/sq ft (US Census, 2026)
Project size
Smaller projects pay a higher percentage — design effort doesn’t shrink in proportion to square footage
Scope of service
Design-only or permit-set services cost less than full service with construction administration

Cost out your own project in New York

Questions about architect fees in New York

How much does an architect cost in New York?

For a 3,000 sq ft custom new home in New York, full architectural services typically run $67,000 – $193,000, about 5%–13% of construction cost. A 2,000 sq ft whole-house renovation typically runs $51,000 – $161,000. An ADU or guest house of about 700 sq ft runs $20,000 – $61,000.

How much do architects charge per square foot in New York?

For a 3,000 sq ft custom new home in New York, full architectural services work out to about $22 – $65 per sq ft, on an estimated construction cost of $300 – $670 per sq ft. Smaller homes cost more per sq ft to design; larger ones cost less.

How do architects in New York charge?

Most residential architects charge a percentage of construction cost, a fixed fee broken into design phases, or hourly rates for smaller or early-stage work. Smaller projects pay a higher share of construction cost because design effort does not shrink in proportion to size.

Are architects more expensive in New York than elsewhere?

The median architect salary in New York is $99,280, in line with the national median of $99,280 (BLS). Local construction costs matter as much: new single-family homes in this part of the country run a median of about $208 per sq ft (US Census).

What is not included in an architect’s fee?

Consultants such as structural engineers, surveyors, civil engineers and energy modelers usually bill separately, as do permit and plan-review fees charged by the building department. In New York, a structural engineer for a 3,000 sq ft new home typically runs $5,000 – $33,000. Ask each architect which consultants their fee includes.

Architects with an office in New York

Related pages

Residential architects in New York, by city

New York

Architect fees by state → · Browse architects in the Northeast →

Looking for an architect in New York?

Tell us about your project and we'll connect you with the right architect — free, no obligation.

Sources: US Bureau of Labor Statistics, Occupational Employment and Wage Statistics (May 2025) for New York; US Census Bureau, Survey of Construction. Estimates are ranges for planning, not quotes — each architect sets their own fees.