How much does an architect cost in Ohio?

For a 3,000 sq ft custom new home in Ohio, full architectural services typically run $53,000 – $146,000 — about 6%–15% of construction cost. These ranges come from the Architects List cost tool, built on Ohio wage data from the US Bureau of Labor Statistics and construction costs from the US Census.

Typical fees by project in Ohio

ProjectArchitect feeShare of constructionConstruction (est.)
New custom home, 3,000 SF$53,000 – $146,0006%–15%$775,000 – $1,262,000
Whole-house renovation, 2,000 SF$40,000 – $121,0008%–24%$310,000 – $842,000
Addition, 600 SF$17,000 – $48,0008%–23%$147,000 – $316,000
ADU or guest house, 700 SF$16,000 – $46,0007%–20%$162,000 – $354,000

New custom home fees by size

Home sizeArchitect feeDesign hours (approx.)
2,000 sq ft$38,000 – $103,000250–680
3,000 sq ft$53,000 – $146,000350–960
4,500 sq ft$75,000 – $206,000500–1360

Implied billing rate about $151/hour. Full services = design through construction administration; consultants (structural, survey, civil, energy) are extra.

Architect fees per square foot in Ohio

Home sizeArchitect fee per sq ftShare of construction
2,000 sq ft$19 – $526%–16%
3,000 sq ft$17 – $496%–15%
4,500 sq ft$16 – $465%–15%

New custom homes, full services. Building a custom home in Ohio is estimated at $255 – $425 per sq ft, excluding land. That is a figure for this part of the country (US Census), adjusted for local construction wages. A custom home costs more to build than the typical new house, so it sits above the regional median shown below.

Other professionals you may need in Ohio

ProfessionalTypical cost
Structural engineerSizes beams, foundations and lateral systems; required for new homes, additions and most structural changes.$4,500 – $21,000
Civil engineerGrading, drainage, utilities and site permits — common on sloped, rural or floodplain sites.$3,000 – $11,500
SurveyorBoundary and topographic survey the design is drawn on; most jurisdictions require one for new work near setbacks.$1,100 – $5,500
Energy consultantEnergy-code compliance calculations (e.g. REScheck, Title 24) and HERS ratings where required.$400 – $3,000
Geotechnical / soilsSoil borings and a foundation report; needed on slopes, expansive soils and many new homes.$1,300 – $6,000

Planning allowances for a 3,000 sq ft new home, scaled to local wages for each profession (BLS). They are billed separately from the architect’s fee, and not every project needs all of them.

Architect fees by metro area in Ohio

Metro areaArchitect fee, 3,000 sq ft custom homeMedian architect salary
Columbus$55,000 – $149,000$99,140
Cleveland$50,000 – $139,000$83,620
Cincinnati$54,000 – $148,000$98,750
Akron$50,000 – $137,000$79,640
Dayton$56,000 – $153,000$102,550
Toledo$56,000 – $152,000$95,480
Canton$48,000 – $132,000$76,500
Youngstown$48,000 – $132,000$81,470

Metro areas where the Bureau of Labor Statistics publishes a local architect wage, largest first. Elsewhere in Ohio, the statewide figures above apply.

How Ohio compares

PlaceArchitect fee, 3,000 sq ft custom homePer sq ftMedian architect salary
Ohio$53,000 – $146,000$17 – $49$94,960
United States$54,000 – $153,000$18 – $51$99,280

What drives architect fees in Ohio

Architect salaries
Median $94,960 in Ohio vs $99,280 nationally (BLS, May 2025)
Construction cost
New single-family homes in this region: median $210/sq ft; middle half $164–$263/sq ft (US Census, 2026)
Project size
Smaller projects pay a higher percentage — design effort doesn’t shrink in proportion to square footage
Scope of service
Design-only or permit-set services cost less than full service with construction administration

Cost out your own project in Ohio

Questions about architect fees in Ohio

How much does an architect cost in Ohio?

For a 3,000 sq ft custom new home in Ohio, full architectural services typically run $53,000 – $146,000, about 6%–15% of construction cost. A 2,000 sq ft whole-house renovation typically runs $40,000 – $121,000. An ADU or guest house of about 700 sq ft runs $16,000 – $46,000.

How much do architects charge per square foot in Ohio?

For a 3,000 sq ft custom new home in Ohio, full architectural services work out to about $17 – $49 per sq ft, on an estimated construction cost of $255 – $425 per sq ft. Smaller homes cost more per sq ft to design; larger ones cost less.

How do architects in Ohio charge?

Most residential architects charge a percentage of construction cost, a fixed fee broken into design phases, or hourly rates for smaller or early-stage work. Smaller projects pay a higher share of construction cost because design effort does not shrink in proportion to size.

Are architects more expensive in Ohio than elsewhere?

The median architect salary in Ohio is $94,960, 4% below the national median of $99,280 (BLS). Local construction costs matter as much: new single-family homes in this part of the country run a median of about $210 per sq ft (US Census).

What is not included in an architect’s fee?

Consultants such as structural engineers, surveyors, civil engineers and energy modelers usually bill separately, as do permit and plan-review fees charged by the building department. In Ohio, a structural engineer for a 3,000 sq ft new home typically runs $4,500 – $21,000. Ask each architect which consultants their fee includes.

Related pages

Architect fees by state → · Browse architects in the Midwest →

Looking for an architect in Ohio?

Tell us about your project and we'll connect you with the right architect — free, no obligation.

Sources: US Bureau of Labor Statistics, Occupational Employment and Wage Statistics (May 2025) for Ohio; US Census Bureau, Survey of Construction. Estimates are ranges for planning, not quotes — each architect sets their own fees.