For a 3,000 sq ft custom new home in Pennsylvania, full architectural services typically run $61,000 – $178,000 — about 4%–13% of construction cost. These ranges come from the Architects List cost tool, built on Pennsylvania wage data from the US Bureau of Labor Statistics and construction costs from the US Census.
| Project | Architect fee | Share of construction | Construction (est.) |
|---|---|---|---|
| New custom home, 3,000 SF | $61,000 – $178,000 | 4%–13% | $872,000 – $1,872,000 |
| Whole-house renovation, 2,000 SF | $47,000 – $148,000 | 6%–20% | $348,000 – $1,248,000 |
| Addition, 600 SF | $19,000 – $58,000 | 6%–19% | $165,000 – $468,000 |
| ADU or guest house, 700 SF | $18,500 – $57,000 | 5%–16% | $183,000 – $524,000 |
| Home size | Architect fee | Design hours (approx.) |
|---|---|---|
| 2,000 sq ft | $43,000 – $125,000 | 300–840 |
| 3,000 sq ft | $61,000 – $178,000 | 420–1200 |
| 4,500 sq ft | $87,000 – $252,000 | 590–1700 |
Implied billing rate about $148/hour. Full services = design through construction administration; consultants (structural, survey, civil, energy) are extra.
| Home size | Architect fee per sq ft | Share of construction |
|---|---|---|
| 2,000 sq ft | $21 – $63 | 5%–13% |
| 3,000 sq ft | $20 – $60 | 4%–13% |
| 4,500 sq ft | $19 – $56 | 4%–12% |
New custom homes, full services. Building a custom home in Pennsylvania is estimated at $290 – $625 per sq ft, excluding land. That is a figure for this part of the country (US Census), adjusted for local construction wages. A custom home costs more to build than the typical new house, so it sits above the regional median shown below.
| Professional | Typical cost |
|---|---|
| Structural engineerSizes beams, foundations and lateral systems; required for new homes, additions and most structural changes. | $5,000 – $30,000 |
| Civil engineerGrading, drainage, utilities and site permits — common on sloped, rural or floodplain sites. | $3,000 – $11,500 |
| SurveyorBoundary and topographic survey the design is drawn on; most jurisdictions require one for new work near setbacks. | $1,100 – $5,500 |
| Energy consultantEnergy-code compliance calculations (e.g. REScheck, Title 24) and HERS ratings where required. | $400 – $3,000 |
| Geotechnical / soilsSoil borings and a foundation report; needed on slopes, expansive soils and many new homes. | $1,300 – $6,000 |
Planning allowances for a 3,000 sq ft new home, scaled to local wages for each profession (BLS). They are billed separately from the architect’s fee, and not every project needs all of them.
| Metro area | Architect fee, 3,000 sq ft custom home | Median architect salary |
|---|---|---|
| Philadelphia | $64,000 – $184,000 | $98,140 |
| Pittsburgh | $59,000 – $171,000 | $83,460 |
| Lancaster | $61,000 – $175,000 | $91,340 |
| Allentown | $61,000 – $177,000 | $84,370 |
| Harrisburg | $59,000 – $171,000 | $81,940 |
| Scranton | $57,000 – $167,000 | $80,870 |
| York | $62,000 – $179,000 | $96,250 |
| Reading | $60,000 – $174,000 | $97,330 |
| Erie | $61,000 – $176,000 | $81,270 |
| State College | $58,000 – $168,000 | $93,820 |
Metro areas where the Bureau of Labor Statistics publishes a local architect wage, largest first. Elsewhere in Pennsylvania, the statewide figures above apply.
| Place | Architect fee, 3,000 sq ft custom home | Per sq ft | Median architect salary |
|---|---|---|---|
| Pennsylvania | $61,000 – $178,000 | $20 – $60 | $97,030 |
| United States | $54,000 – $153,000 | $18 – $51 | $99,280 |
For a 3,000 sq ft custom new home in Pennsylvania, full architectural services typically run $61,000 – $178,000, about 4%–13% of construction cost. A 2,000 sq ft whole-house renovation typically runs $47,000 – $148,000. An ADU or guest house of about 700 sq ft runs $18,500 – $57,000.
For a 3,000 sq ft custom new home in Pennsylvania, full architectural services work out to about $20 – $60 per sq ft, on an estimated construction cost of $290 – $625 per sq ft. Smaller homes cost more per sq ft to design; larger ones cost less.
Most residential architects charge a percentage of construction cost, a fixed fee broken into design phases, or hourly rates for smaller or early-stage work. Smaller projects pay a higher share of construction cost because design effort does not shrink in proportion to size.
The median architect salary in Pennsylvania is $97,030, 2% below the national median of $99,280 (BLS). Local construction costs matter as much: new single-family homes in this part of the country run a median of about $208 per sq ft (US Census).
Consultants such as structural engineers, surveyors, civil engineers and energy modelers usually bill separately, as do permit and plan-review fees charged by the building department. In Pennsylvania, a structural engineer for a 3,000 sq ft new home typically runs $5,000 – $30,000. Ask each architect which consultants their fee includes.
Residential architects in Pennsylvania, by city
Architect fees by state → · Browse architects in the Mid-Atlantic →
Looking for an architect in Pennsylvania?
Tell us about your project and we'll connect you with the right architect — free, no obligation.
Sources: US Bureau of Labor Statistics, Occupational Employment and Wage Statistics (May 2025) for Pennsylvania; US Census Bureau, Survey of Construction. Estimates are ranges for planning, not quotes — each architect sets their own fees.