For a 3,000 sq ft custom new home in Washington, full architectural services typically run $59,000 – $171,000 — about 4%–13% of construction cost. These ranges come from the Architects List cost tool, built on Washington wage data from the US Bureau of Labor Statistics and construction costs from the US Census.
| Project | Architect fee | Share of construction | Construction (est.) |
|---|---|---|---|
| New custom home, 3,000 SF | $59,000 – $171,000 | 4%–13% | $850,000 – $1,804,000 |
| Whole-house renovation, 2,000 SF | $45,000 – $142,000 | 6%–20% | $340,000 – $1,203,000 |
| Addition, 600 SF | $18,500 – $56,000 | 6%–19% | $161,000 – $451,000 |
| ADU or guest house, 700 SF | $18,000 – $54,000 | 6%–17% | $178,000 – $505,000 |
| Home size | Architect fee | Design hours (approx.) |
|---|---|---|
| 2,000 sq ft | $42,000 – $121,000 | 290–830 |
| 3,000 sq ft | $59,000 – $171,000 | 410–1180 |
| 4,500 sq ft | $84,000 – $243,000 | 580–1680 |
Implied billing rate about $145/hour. Full services = design through construction administration; consultants (structural, survey, civil, energy) are extra.
| Home size | Architect fee per sq ft | Share of construction |
|---|---|---|
| 2,000 sq ft | $21 – $61 | 5%–14% |
| 3,000 sq ft | $19 – $57 | 4%–13% |
| 4,500 sq ft | $18 – $54 | 4%–12% |
New custom homes, full services. Building a custom home in Washington is estimated at $280 – $605 per sq ft, excluding land. That is a figure for this part of the country (US Census), adjusted for local construction wages. A custom home costs more to build than the typical new house, so it sits above the regional median shown below.
| Professional | Typical cost |
|---|---|
| Structural engineerSizes beams, foundations and lateral systems; required for new homes, additions and most structural changes. | $5,000 – $29,000 |
| Civil engineerGrading, drainage, utilities and site permits — common on sloped, rural or floodplain sites. | $3,500 – $13,000 |
| SurveyorBoundary and topographic survey the design is drawn on; most jurisdictions require one for new work near setbacks. | $1,400 – $7,000 |
| Energy consultantEnergy-code compliance calculations (e.g. REScheck, Title 24) and HERS ratings where required. | $500 – $3,500 |
| Geotechnical / soilsSoil borings and a foundation report; needed on slopes, expansive soils and many new homes. | $1,600 – $6,500 |
Planning allowances for a 3,000 sq ft new home, scaled to local wages for each profession (BLS). They are billed separately from the architect’s fee, and not every project needs all of them.
| Metro area | Architect fee, 3,000 sq ft custom home | Median architect salary |
|---|---|---|
| Seattle | $60,000 – $174,000 | $100,610 |
| Portland, OR | $60,000 – $173,000 | $100,490 |
| Spokane | $56,000 – $160,000 | $95,910 |
| Bremerton | $59,000 – $170,000 | $95,350 |
| Olympia | $57,000 – $164,000 | $93,720 |
| Kennewick | $65,000 – $184,000 | $102,890 |
| Bellingham | $59,000 – $169,000 | $92,320 |
Metro areas where the Bureau of Labor Statistics publishes a local architect wage, largest first. Elsewhere in Washington, the statewide figures above apply.
| Place | Architect fee, 3,000 sq ft custom home | Per sq ft | Median architect salary |
|---|---|---|---|
| Washington | $59,000 – $171,000 | $19 – $57 | $100,190 |
| United States | $54,000 – $153,000 | $18 – $51 | $99,280 |
For a 3,000 sq ft custom new home in Washington, full architectural services typically run $59,000 – $171,000, about 4%–13% of construction cost. A 2,000 sq ft whole-house renovation typically runs $45,000 – $142,000. An ADU or guest house of about 700 sq ft runs $18,000 – $54,000.
For a 3,000 sq ft custom new home in Washington, full architectural services work out to about $19 – $57 per sq ft, on an estimated construction cost of $280 – $605 per sq ft. Smaller homes cost more per sq ft to design; larger ones cost less.
Most residential architects charge a percentage of construction cost, a fixed fee broken into design phases, or hourly rates for smaller or early-stage work. Smaller projects pay a higher share of construction cost because design effort does not shrink in proportion to size.
The median architect salary in Washington is $100,190, 1% above the national median of $99,280 (BLS). Local construction costs matter as much: new single-family homes in this part of the country run a median of about $190 per sq ft (US Census).
Consultants such as structural engineers, surveyors, civil engineers and energy modelers usually bill separately, as do permit and plan-review fees charged by the building department. In Washington, a structural engineer for a 3,000 sq ft new home typically runs $5,000 – $29,000. Ask each architect which consultants their fee includes.
Residential architects in Washington, by city
Architect fees by state → · Browse architects in the Pacific Northwest →
Looking for an architect in Washington?
Tell us about your project and we'll connect you with the right architect — free, no obligation.
Sources: US Bureau of Labor Statistics, Occupational Employment and Wage Statistics (May 2025) for Washington; US Census Bureau, Survey of Construction. Estimates are ranges for planning, not quotes — each architect sets their own fees.