For a 3,000 sq ft custom new home in California, full architectural services typically run $65,000 – $185,000 — about 5%–14% of construction cost. These ranges come from the Architects List cost tool, built on California wage data from the US Bureau of Labor Statistics and construction costs from the US Census.
| Project | Architect fee | Share of construction | Construction (est.) |
|---|---|---|---|
| New custom home, 3,000 SF | $65,000 – $185,000 | 5%–14% | $837,000 – $1,758,000 |
| Whole-house renovation, 2,000 SF | $49,000 – $155,000 | 7%–22% | $335,000 – $1,172,000 |
| Addition, 600 SF | $20,000 – $60,000 | 7%–21% | $159,000 – $440,000 |
| ADU or guest house, 700 SF | $19,500 – $59,000 | 6%–18% | $175,000 – $493,000 |
| Home size | Architect fee | Design hours (approx.) |
|---|---|---|
| 2,000 sq ft | $46,000 – $131,000 | 260–740 |
| 3,000 sq ft | $65,000 – $185,000 | 370–1050 |
| 4,500 sq ft | $92,000 – $263,000 | 530–1490 |
Implied billing rate about $176/hour. Full services = design through construction administration; consultants (structural, survey, civil, energy) are extra.
| Home size | Architect fee per sq ft | Share of construction |
|---|---|---|
| 2,000 sq ft | $23 – $66 | 5%–15% |
| 3,000 sq ft | $21 – $62 | 5%–14% |
| 4,500 sq ft | $20 – $59 | 5%–13% |
New custom homes, full services. Building a custom home in California is estimated at $275 – $590 per sq ft, excluding land. That is a figure for this part of the country (US Census), adjusted for local construction wages. A custom home costs more to build than the typical new house, so it sits above the regional median shown below.
| Professional | Typical cost |
|---|---|
| Structural engineerSizes beams, foundations and lateral systems; required for new homes, additions and most structural changes. | $5,000 – $29,000 |
| Civil engineerGrading, drainage, utilities and site permits — common on sloped, rural or floodplain sites. | $4,000 – $14,000 |
| SurveyorBoundary and topographic survey the design is drawn on; most jurisdictions require one for new work near setbacks. | $1,600 – $8,000 |
| Energy consultantEnergy-code compliance calculations (e.g. REScheck, Title 24) and HERS ratings where required. | $600 – $4,000 |
| Geotechnical / soilsSoil borings and a foundation report; needed on slopes, expansive soils and many new homes. | $1,700 – $7,000 |
Planning allowances for a 3,000 sq ft new home, scaled to local wages for each profession (BLS). They are billed separately from the architect’s fee, and not every project needs all of them.
| Metro area | Architect fee, 3,000 sq ft custom home | Median architect salary |
|---|---|---|
| Los Angeles | $64,000 – $181,000 | $104,170 |
| San Francisco | $71,000 – $201,000 | $126,550 |
| San Diego | $65,000 – $183,000 | $120,040 |
| San Jose | $75,000 – $213,000 | $129,640 |
| Sacramento | $65,000 – $185,000 | $125,980 |
| Riverside | $62,000 – $176,000 | $100,460 |
| Santa Barbara | $62,000 – $175,000 | $103,820 |
| Fresno | $61,000 – $172,000 | $100,360 |
| Santa Rosa | $65,000 – $183,000 | $107,300 |
| Oxnard | $61,000 – $173,000 | $102,530 |
| Bakersfield | $63,000 – $177,000 | $111,070 |
| San Luis Obispo | $61,000 – $173,000 | $99,800 |
| Stockton | $62,000 – $176,000 | $101,540 |
| Redding | $66,000 – $185,000 | $120,060 |
| Salinas | $61,000 – $173,000 | $99,600 |
| Santa Cruz | $60,000 – $170,000 | $105,750 |
| Visalia | $59,000 – $167,000 | $98,890 |
| Modesto | $63,000 – $177,000 | $124,810 |
Metro areas where the Bureau of Labor Statistics publishes a local architect wage, largest first. Elsewhere in California, the statewide figures above apply.
| Place | Architect fee, 3,000 sq ft custom home | Per sq ft | Median architect salary |
|---|---|---|---|
| California | $65,000 – $185,000 | $21 – $62 | $108,540 |
| United States | $54,000 – $153,000 | $18 – $51 | $99,280 |
For a 3,000 sq ft custom new home in California, full architectural services typically run $65,000 – $185,000, about 5%–14% of construction cost. A 2,000 sq ft whole-house renovation typically runs $49,000 – $155,000. An ADU or guest house of about 700 sq ft runs $19,500 – $59,000.
For a 3,000 sq ft custom new home in California, full architectural services work out to about $21 – $62 per sq ft, on an estimated construction cost of $275 – $590 per sq ft. Smaller homes cost more per sq ft to design; larger ones cost less.
Most residential architects charge a percentage of construction cost, a fixed fee broken into design phases, or hourly rates for smaller or early-stage work. Smaller projects pay a higher share of construction cost because design effort does not shrink in proportion to size.
The median architect salary in California is $108,540, 9% above the national median of $99,280 (BLS). Local construction costs matter as much: new single-family homes in this part of the country run a median of about $190 per sq ft (US Census).
Consultants such as structural engineers, surveyors, civil engineers and energy modelers usually bill separately, as do permit and plan-review fees charged by the building department. In California, a structural engineer for a 3,000 sq ft new home typically runs $5,000 – $29,000. Ask each architect which consultants their fee includes.
Residential architects in California, by city
Architect fees by state → · Browse architects in the California →
Looking for an architect in California?
Tell us about your project and we'll connect you with the right architect — free, no obligation.
Sources: US Bureau of Labor Statistics, Occupational Employment and Wage Statistics (May 2025) for California; US Census Bureau, Survey of Construction. Estimates are ranges for planning, not quotes — each architect sets their own fees.